Koden MDC-2200 series, Руководство по установке

Страница: 77 / 123

MDC-2200/2500 Series Chapter 5 Detailed setup and additional menu
0092625002-06 5-15
5.1.5 Chart
5.1.5.1 Display line from own ship location to mark
This is to set up to display line from own ship location to specified mark.
Setting value : Off, On
Setup line to “ON”, then line is displayed by following procedures.
Input mark on waypoint and display line enabling the shortest navigation.
5.1.5.2 Mark setup (Latitude and longitude input)
This is used to register the “Mark” in the block set in “BLOCK NO”.
Setting value : Shape, Latitude, Longitude, Delete
Shape : Select desired shape in 18 types of shape.
Remarks : In case of “MARK DISPLAY” – “OFF” or “BLOCK NO” between input “BLOCK NO” and
current “BLOCK NO” being different being different, Lat-Long does not indicate.
5.1.5.3 All marks display
All marks can be displayed regardless of the block number.
Setting value : Off, On
OFF: Mark designated with block number is displayed.
ON: All mark is displayed.
5.1.5.4 Chart selection
This is used to select the chart used in map display.
Setting value : Japan, Global
Note: no detail Japan map is displayed even if the “Koden map card for MDC series” is inserted
with setting value of “Global”.
5.1.5.5 Chart display setup
This is used to specify items to be displayed on the chart.
Setting items are shown in the following list.
Item Default Setup value
Land Color No color, Color
Land color D/N Yellow Brown, Green, Blue, Yellow
Place name Off Off, On
Light house Off Off, On
Buoy Off Off, On
Fish haven
/Wreck
Off Off, On