MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series Chapter 4
Operation Manual
Installation
0093142122-11
4-27
APPENDIX 1
Installation of the ATA module, MRE-300
The ATA module MRE-300 is installed inside the display unit. Use the following the
instructions for installation.
(1) Locate the position of the four fixing studs on the Main Logic PCB (E47-700*)
prepared for the ATA module. (Refer to the figure below)
(2) Put the ATA module (MRE-300) on the studs and press the module gently
downwards in order that the connector installed on the module properly plugs into
the receptacle J705 on the Main Logic PCB.
(3) Fix the module using the four 3 mm fixing screws, prepared in the ATA module kit.
Installation of the AIS module, AIS-100
The AIS module (AIS-100) is installed inside the display unit. Use the following
instructions for installation.
(1) Locate the position of the four fixing studs on the Main Logic PCB (E47-700*)
prepared for the AIS module. (Refer to the figure below)
(2) Put the AIS module (AIS-100) on the studs and press the module gently
downwards in order that the connector installed on the module properly plugs into
the receptacle J716 on the Main Logic PCB.
(3) Fix the module using the four 3 mm fixing screws, prepared in the AIS-100 kit.
Main Logic PCB
E47-700A
J705
J705
J716
MRE-300
AIS-100
