MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series Chapter 6
Using The Menu
Operation Manual
93142122-07
6-17
Table 6.3 The relation of the sentences and available device names
Sentence
Talker identifier available
On-screen display
Device name
VD
DO LOG/WT-Speed
Doppler LOG
VM LOG
Speed
LOG,
magnetic
VHW
VW LOG
Speed
LOG,
mechanical
VBW
VD
DO LOG/BT-Speed
Doppler LOG
VDR
VD
DO LOG
Doppler LOG
GP GP
GPS receiver
VTG
VD DO
LOG
Doppler LOG
6.4.1.5 LOG PULSE (Log Pulse Rate)
This menu is used to set up the incoming log pulse ratio, which is fed to the Gyro
Interface unit, type KSA-08A built into the processor unit.
The following pulse ratios can be selected: 100, 200, 400 and 500 pulses/nm.
Indication
Meaning
Selection
LOG PULSE
Log pulse count for 1 NM
100, 200, 400, 500
6.4.1.6
GYRO
(Gyro Gear Ratio)
This menu is used to set up the gyro gear ratio used, which is fed to the Gyro Interface
unit, type KSA-08A. The following pulse ratios can be selected: 36X, 90X, 180X and
360X.
Indication
Meaning
Selection
GYRO
Gear Ratio for Gyro repeater
36, 90, 180, 360
6.4.1.7 Serial Input Format
This menu is used to select the type of incoming serial signal sent from external
equipment for each data input connector from DATA1 to DATA3. The following signal
formats can be selected:
SERIAL
IEC61162-1, NMEA-0183,NMEA-0182,KODEN-717
6.4.1.8
SERIAL TRANSMIT (Serial Output Interval)
This menu is used to select the interval of transmission of outgoing signals.
Indication
Meaning
Selection
SERIAL TRANSMIT
Serial Output Interval
0.1 to 9.9 SEC
