Koden KRD-10, Руководство по эксплуатации, Страница: 88 / 130

Chapter 4 Setup Procedure KRD-10
4-22 0093170212-01
data has smaller variations. However, delays for updating occur. When you select a “0” value, data is
averaged less but the display data responds quicker.
Selecting a constant (averaging constant) suitable for your boat will provide you with smoother data of
ship heading.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
1: Averaging
”.
(4) Press key to select
“
2: Averaging (Heading)
”.
(5) Press [ ] or [ ] key to move cursor onto the average constants to select
“0 to 6”.
(6) Press key.
Initial setup: 0
Average constants
0: OFF, 1: 3 times average, 2: 6 times average, 3: 12 times average, 4: 18 times average,
5: 24 times average, 6: 30 times average
4.5.3 Setting average constants (Rotation angular velocity)
Use the averaging function to compare GPS compass sensor signals several times and get their
average.
This stabilizes the rotation angular velocity data from GPS compass. The maximum averaging rate is
“6” and the minimum averaging rate is “0”. When you select “6” value, data is averaged more often and
the display data has smaller va
riations. However, delays for updating occur. When you select a “0”
value, data is averaged less but the display data responds quicker.
Selecting a constant (averaging constant) suitable for your boat will provide you with smoother data of
rotation angular velocity.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
1: Averaging
”.
7
1
Press
1
ENT
2/N
Press
2/N
MENU
7
1
MENU
2/N