Koden KRD-10, Руководство по эксплуатации, Страница: 49 / 130

KRD-10 Chapter 2 Various Navigation
0093170212-01 2-13
(9) [Waypoint] settings:
1) Press key to select of the Input location of Waypoint.
2) Enter a waypoint number (0000 to 9999) of the route by numeric keys. (You can check its
memory data on the screen.)
3) Press key to store the waypoint number.
(10) Repeat (9) steps to set another waypoint in the route.
2.4.2 Automatic switching of waypoints
Route navigation can switch the current waypoint in two ways: switching in CIRCLE mode and
switching in BI-SECTOR mode. In CIRCLE mode, the next waypoint is shown when you reach the
proximity alarm circle. In BI-SECTOR mode, the next waypoint is shown when you cross a half-angle
line.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
2: Route
”.
(3) Press key to s
elect “
2: Waypoint change
”.
(4) Press [ ] or [ ] key to locate cursor to select a mode.
(5) Press key. The selected mode will be shown.
2.4.3 Copying a single route
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
2: Route
”.
(3) Press key to s
elect “
1: Route Set / Edit
”. Route Input screen is displayed.
(4) Enter a route number (001 to 100) using numeric keys and press key.
(5) Press key to display the pop-up.
(6) Select [ Copy ] in the pop-up and press key.
(7) Enter a source point number (001 to 100) by numeric keys.
(8) Press key to copy the route data.
When you reach the proximity alarm circle,
the course line is switched from A to B. To
change the proximity alarm range, see
“
Setting and canceling
” (page 3-5).
When you cross a half-angle line, the
course line is switched from A to B.
ENT
ENT
MENU
2/N
2/N
ENT
2/N
MENU
1
ENT
ENT
ENT
ENT
CIRCLE mode
Proximity
Alarm circle
Waypoint Course line B Course line A
BI-SECTOR mode
Waypoint
Course line A Course line B