Koden KRD-10, Руководство по эксплуатации, Страница: 74 / 130

Chapter 4 Setup Procedure KRD-10
4-8 0093170212-01
4.3.3 Disable position correction
To delete and disable the correction offset follow these steps:
(1) Press key until Menu options 1 to 9 appears.
(2) Press
key to select “
4: Compensation
”.
(3) Press
key to select “
2: Latitude / Longitude
”.
(4) Press key to set 0 of offset corrections.
(5) If OK, select [ Yes ] in the pop-up and press key.
If Cancel, select [ No ] in the pop-up and press key.
4.3.4 Compensating the LOP
KRD-10 is converted from Latitude and Longitude to LoranC, LoranA and Decca. It can be corrected in
the converted data. (Caution: Can not convert Decca LOP.)
To change the
“
3: LOP
”
, the following settings are required
You can set of LoranA, LoranC or Decca of “
3: LOP
” change when you changed
8: Lop and
9: Chain in the Menu7: Initial setup.
(1) Press key until Menu options 1 to 9 appears.
(2) Press
key to select “
7: Initial setup
”.
(3) Press
key to select “
8: Lop
”.
(4) Setting
“LoranA” or “LoranC” or “Decca”
(5) Press key.
(6) Press [ ] key to input Chain number.
Select Loran C: Set the (4-digit) chain number, and the first digit of two slave stations by numeric keys.
Select Loran A / Decca: Select the chain number and the slave stations in the pop-up.
2/N
MENU
4/W
CLR
ENT
8/S
MENU
7
ENT
ENT