Koden KRD-10, Руководство по эксплуатации, Страница: 72 / 130

Chapter 4 Setup Procedure KRD-10
4-6 0093170212-01
4.3 Menu 4: Compensation
4.3.1 Correcting ship heading
The ship heading is received from the GPS compass and displayed. You can correct the deviation of
the actual ship heading azimuth by the following operation:
(1) Press key until Menu options 1 to 9 appears.
(2) Press
key to select “
4: Compensation
”.
(3) Press
key to select “
1: Heading
”.
(4) Enter a (4-digit) compensation offset by numeric keys.
(5) To correct to (-), move the cursor to the "+/-" place and press the " " key.
(6) Press key.
Initial setup: +000.0°
4.3.2 Correcting your position
You can compensate your GNSS present position given by GNSS in the following two ways:
• Enter the latitude and longitude of your actual position by numeric keys.
• Enter the correction offset to use.
(Direct entry of actual position data)
When your present position is displayed in Latitude / Longitude mode, you can correct it by entering the
known Latitude/Longitude data.
(1) Press key until Menu options 1 to 9 appears.
(2) Press
key to select “
4: Compensation
”.
(3) Press
key to select “
2: Latitude / Longitude
”.
MENU
4/W
2/N
1
MENU
4/W
ENT