Kodak X-OMAT 7000, Руководство пользователя, Страница: 64 / 146

Key Operator Instructions
5– 4 16FEB01 – 7E6174
5. Open the Magazine Door.
6. Insert the recoded Magazine and close the Magazine Door.
7. From the Display Panel check that the correct film size is displayed. If not,
remove the Magazine and check the setting of the Reflective Stickers.
8. Load the recoded Magazine with test films.
9. Check whether there is too much play between the films and the Stops in the
Magazine. There must be no more than 4 mm (0.157 in.) clearance between the
films and the Stops. If the play is too great, remove the films and check the setting
of the Stops inside the Magazine.
Important
Load the Magazine only if you are absolutely sure that the setting of the Reflective
Stickers and the Stops is correct. Otherwise, serious damage to the KODAK X-OMAT
Multiloader 7000 (Multiloader) can result.
10. Load the Magazine with unexposed films and insert the Magazine into the
Multiloader.
Magazine Door
H186_1103GC
H186_1103GCA