Kodak X-OMAT 7000, Руководство пользователя, Страница: 107 / 146

Key Operator Instructions
7E6174 – 16FEB01 5 –47
Replenishment Volume
Replenishment volume changes are stored for the cycle until new changes are made.
Replenishment volume is dependent on the replenishment mode: Automatic or
Flooded.
In the Automatic Replenishment mode, replenishment solutions are added when an
area of film equivalent to approximately 1500 cm
2
(240 in.
2
) has been processed, for
example, one 35 x 43 cm (14 x 17 in.) sheet of film.
As film usage for the Processor decreases, the volumes of developer and fixer
necessary for correct replenishment increase.
Enter the volume for the Developer and Fixer Replenishment on the keypad for high
film usage.
The Microprocessor automatically calculates the replenishment volumes for low and
medium film usage.
In the Flooded Replenishment mode, default developer and fixer replenishment
volumes are:
• 65 ml every 5 minutes and
• 65 ml for each 1500 cm
2
(240 in.
2
) of film
Note
Before changing the replenishment volumes, do a replenishment calibration.
To change the replenishment volumes from the factory default setting:
1. Press GO TO SETUP.
Film Usage
Films/
1/2 hour (Auto) Replenishment Volume
Developer
(/sheet)
Low 1 - 2 92 113
Medium 3 - 4 73 95
High 5 (or more) 55* 80*
*default value
H186_8522AC
DATE
TIME/
STD
95.0 F = DEV TEMP
RETURN SETUP FIX TEMP
127.4 F = DRYER TEMP
DONE/ GO TO DISPLAY
PROCESSOR READY