Kodak X-OMAT 7000, Руководство пользователя, Страница: 11 / 146

Introduction
7E6174 – 16FEB01 1– 5
Warnings
Read and understand all instructions before operating the KODAK
X-OMAT Multiloader 7000.
Caution
United States federal law restricts this device to sale to, by, or on order of a physician.
The information contained herein is based on the experience and knowledge relating
to the subject matter gained by Eastman Kodak Company prior to publication. No
patent license is granted by this information. Eastman Kodak Company reserves the
right to change this information without notice and makes no warranty, express or
implied, with respect to this information. Kodak shall not be liable for any loss or
damage, including consequential or special damages, resulting from the use of this
information, even if loss or damage is caused by Kodak’s negligence or other fault
Warning
To avoid hazardous conditions, keep floors and floor coverings around your
Multiloader and associated drains clean and dry at all times. Any accumulation of
fluids from external lines, e.g., drain lines, should be cleaned up immediately. In the
event of an accumulation of liquid due to backup, overflow, or other malfunctions of
the drain associated with the Multiloader, call a plumber or other contractor to correct
the problem. Kodak accepts no responsibility or liability whatsoever for the
serviceability of any drain connected to or associated with the KODAK
X-OMAT Multiloader 7000. Such drains are the sole responsibility of the Customer.
Warning
• Drains must be made of chemically-resistant, non-corrosive material. Use PVC or
equivalent.
• Drain service must comply with local codes.