Kodak RP 30, Руководство оператора

Страница: 165 / 235

Production
Printing File Prints with Preview
With preview active, a large number of functions are offered for image correction and
image enhancement. The edited images can be saved on data carriers.
1. Touch Start print .
Up to four images are shown at the same time. The corrections of the selected
configuration are taken into consideration. You can modify these corrections for
each individual image in the display. Information about the current configuration
is shown on the side of the buttons.
Because of capacity limitations, the images in the display have many fewer pixels
than the print will have. Lack of sharpness is therefore difficult to discover in the
preview.
The preview continues automatically at the preset speed. If the active image (on
the extreme right) advances without operator action, it is printed with the preset
configuration.
2. If necessary, stop the automatic cycle by touching Stop , and edit the active
image.
3. Touch Enlarged view on .
The current frame is shown twice for comparison:
•
Original (small)
•
Edited version (enlarged)
If there are modifications, the display is refreshed with the function
Image
editing or Special .
4. Touch Rotate display .
To show an enlarged picture upright (always by 90° cw).
5. Enlarged view off returns to the normal view of the four images.
The same buttons are offered in the view of four images and the enlarged view:
•
Change PpF
Change the number of prints per frame.
•
Image editing and Specially
Also see Image Editing and Specially in All Print Modes with Preview below.
•
Hold
All corrections, etc.—except the enlarged view—are kept for all other prints of the
order up to the next modification.
•
Print & Stop
The current frame is printed. It remains marked so that other modifications and
further prints can be made.
KODAK PROFESSIONAL RP 30 Laser Printer 6-21