Kodak RP 30 Скачать руководство пользователя страница 149

Страница: 149 / 235

Production

Putting Paper in the Magazine

Photographic paper must always be stored in a cool and dry place. The best storage
temperature is 2 - 10°C (36 - 50°F).

1. Take the paper out of the cool storage at least 24 hours before use so that any

condensation on the paper dries.

2. In the darkroom, take the paper roll out of the package and push the core

through the roll.

3. Put the paper in the magazine and observe the winding direction (see the figure

below).

4. Pull the leading paper edge through the two brackets on the magazine outlet.

5. Pull the paper slightly out of the magazine. Hold the paper with one hand and

close the magazine with the other hand.

IMPORTANT:

Avoid fogging of the leading paper edge.

6. Rewind the paper after closing the magazine by rotating one of the gears on the

side of the magazine opening until the magazine latch locks.

KODAK PROFESSIONAL RP 30 Laser Printer

6-5

Содержание RP 30











































































































































































































































Результаты поиска

Содержание RP 30

Отзывы:

Kodak RP 30, Руководство оператора, Страница: 149 / 235

Результаты поиска

Содержание RP 30

Отзывы: