A-61601 June 2010
5-1
5 Maintenance
Contents
Opening the scanner cover............................................................. 5-1
Cleaning procedures....................................................................... 5-2
Cleaning the rollers ................................................................... 5-2
Cleaning the separation module................................................. 5-3
Cleaning the feed module .......................................................... 5-4
Vacuuming the scanner .............................................................. 5-6
Cleaning the imaging area ......................................................... 5-6
Running a transport cleaning sheet............................................ 5-7
Replacement procedures ............................................................... 5-8
Replacing the separation module and tires ................................ 5-8
Replacing the pre-separation pad ............................................ 5-10
Replacing the feed module and tires ........................................ 5-11
Adjusting the pre-separation roller tension ................................... 5-13
Supplies and consumables .......................................................... 5-13
Opening the scanner
cover
1. Before opening the scanner cover, be sure the input tray is in the
open position a(PS410 Scanner only) and, if the optional output tray
and/or dangler are attached, remove them.
2. Press and hold the scanner cover release lever and pull the scanner
cover down.
3. When you finish cleaning the scanner or replacing a part, close the
scanner cover with both hands.
