3-6
A-61601 June 2010
Flatbed Scan
— allows you to scan another photo from the flatbed.
Image Cleaner Tool
— when checked, the Picture Saver Scanning
System will make every attempt to eliminate any streaks in the image
during the scanning process. Applying the Image Cleaner Tool does not
slow down the scanning process. Frequently, streaks in images are
caused because the scanner has accumulated dust and dirt. Be sure
your scanner is clean to help prevent streaks in images.
NOTE: The Image Cleaner tool is not applied to flatbed scans.
Settings
— when selected, the Scan Settings screen is displayed
which allows you to change the following settings from batch to batch:
the batch scan mode, sharpen images and the resolution. For more
information regarding these settings see the section entitled, “Scan
Settings screen”.
Redo Batch
Scan/Redo Flatbed Scan
— allows you to rescan and
replace the last batch of scanned images and displays the Scan Viewer
screen.
Auto Rotate
— when selected, the Picture Saver Scanning System will
make every attempt to properly automatically rotate images to the
correct orientation. This option works most effectively for photos with
faces; therefore some photos may still need to be rotated manually.
For two-sided scans, the back side image is automatically rotated with
the same orientation as the detected orientation for the front side
image.
ReTouch Batch
— automatically enhances (e.g., color, contrast,
brightness, etc.) images scanned as color in a batch. When this option
is selected, an
Image Retouch
progress bar is displayed at the top of
the screen.
Batch Information
— these values will be 0 until a batch has been
scanned.
•
Image
: displays the number of the first image shown in the 16-Up
Display window.
•
To
: displays the number of the last image shown in the 16-Up Display
window.
•
Of
: displays the total number of photos scanned in the batch.
