3-8
A-61601 June 2010
Scan Settings screen
The Scan Settings screen allows you to change the default settings
used in the scanning process.
Scan as
— select either
Color
or
Grayscale
.
NOTE: Color scanning is recommended for most photos, including
black and white and grayscale photos, so Retouch and Sharpen
processing may be applied to the scanned images. Use
Grayscale
scanning for exception processing if color scan
results are not what you desired.
Mode
— select one of the following batch scan modes:
•
Front Side
— captures the front side of the photo that is in the input
tray. This is the recommended mode for photos.
•
Back Side
— captures the back side of the photo that is in the input
tray.
•
Two Sided
— captures both sides of the photo as two separate
image files labeled A and B.
NOTE: Photos should always be scanned face up.
Resolution
— allows you to select the dots per inch (dpi), which affects
the size of the image. The options are: 300, 600 and 1200 dpi. The
default is 300 dpi. In most cases, 300 dpi is sufficient. Selecting 600 dpi
or 1200 dpi increases scanning and processing time.
