Kodak i4250 Скачать руководство пользователя страница 69

Страница: 69 / 81

A-61837 June 2015

5-15

To replace the tires:

5. Replace each tire by sliding the tire off the core.

6. Install each new tire by gently pulling it over the core.

IMPORTANT:Do not overstretch the tire; it may tear.

7. Reinstall the separation roller. Be sure to line up the slots on the separation

roller with the holders.

8. Gently lower the roller cover back in place.

9. Close the scanner cover.

Replacing the pre-
separation pad

Change the pre-separation pad when the frequency of multifed documents
increases.

1. Open the scanner cover.

2. Remove the pre-separation pad by lifting the pad up and out of position.

NOTE: The pre-separation pad fits snuggly in place; therefore, a little

force may be required to remove it.

3. Install the new pre-separation pad. Be sure it snaps into place.

4. Close the scanner cover.

Содержание i4250


















































































Результаты поиска

Содержание i4250

Отзывы:

Похожие инструкции для i4250

Бренды по названию

Популярные бренды

Kodak i4250, Руководство пользователя

Результаты поиска

Содержание i4250

Отзывы:

Похожие инструкции для i4250

Бренды по названию

Популярные бренды