3-28
A-61580 November 2007
Creating different
settings for each side of
a document
In this example, let’s assume you want to configure a two-sided
document stream of business documents that have color on the front of
the document but the rear side is fine in black and white.
1. If you are not already on the Advanced tab:
• Select a
Setting Shortcut
from the main
Kodak
Scanner window
that closely describes your desired output.
• Select
Settings
to display the Image Settings window.
• Select
Advanced Image Setup
icon on the Image Settings
window to display the Advanced tab.
2. Select
Input document is: Two Sided
.
3. Turn on the
Different settings per side
option.
4. Select
Images per side: One
.
5. Select
Done
to return to the Image Settings window.
NOTE: You will notice that the
Side
option now has two entries:
Front
and
Back
.
6. Select
Sides: Front
.
7. Select
Color (24-bit)
for the
Scan as
option on the General tab.
Make any other adjustments to the front side settings on the rest of
the tabs on the Image Settings window.
8. Select
Sides: Back.
9. Select
Black and White (1-bit)
for the
Scan as
option on the
General tab.
Make any other adjustments to the back side settings on the rest of
the tabs on the Image Settings window.
10. When finished, select
Home
to return to the main
Kodak
Scanner
window and then select
Save
to save your selections to the
shortcut.
NOTE: If you selected any option other than
Images per side: One
in
Step 4, two
Images to Configure
options groups would become
available. You can then individually setup the images that will be
produced for each side of the document.
