Kodak Guidelines 3000 series Скачать руководство пользователя страница 63

Страница: 63 / 79

Maintaining
the Printer

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

Change Waste Ink

Step 18

Remove the waste ink box from the printer unit and set a new waste
ink box to the printer unit.

Change Tank?

Step 19

Press the [VALUE+] key or the [VALUE-] key to select "Yes." Press
the [ENTER] key to confirm.

(CMYK) Cartridge

Step 20

The ink system is now renewed and ready to use another type of ink.
The Initial fill is executed when installing ink cartridges.

Note: The cleaning cassettes are one time use only.

HEAD WASHING PROCEDURE (3043 and 3062 Printers Only)

(Required only when switching from pigmented ink to dye ink.)

Plot OK

Step 1

Press the [MENU] key to enter the MENU MODE operation.

* Menu *

Utility >

Step 2

Bring up the "Utility" menu by pressing the [Menu Up

] key or the

[Menu Down

] key.

* Menu *

Utility >

Step 3

Press the [ENTER] key to confirm the "Utility" menu and shift to the
next level.

Head Wash

Step 4

Bring up the "Head Wash" item by pressing the [Menu Up

] Key or

the [Menu Down

] Key.

Head Wash

Yes

Step 5

Press the [VALUE+] key or the [VALUE-] key to select "Yes." Press
the [ENTER] key to confirm "Head Wash Yes" and shift to the next
menu.

Change Waste Ink

Step 6

Remove the waste ink box from the printer unit and set a new waste
ink box to the printer unit.

Change Tank?

Step 7

Press the [VALUE+] key or the [VALUE-] key to select "Yes."

Change Tank?

Yes

Step 8

Press the [ENTER] key to confirm "Yes."

Remove Cartridge

Step 9

Remove all ink cassettes from their slots.

Set Wash Cart

Step 10

Insert a cleaning cassette into each slot.

Head Wash

The cleaning starts when all cleaning cassettes are inserted. The
cleaning period is about 20 minutes.

Содержание Guidelines 3000 series
















































































Результаты поиска

Содержание Guidelines 3000 series

Отзывы:

Kodak Guidelines 3000 series, Руководство пользователя, Страница: 63 / 79

Результаты поиска

Содержание Guidelines 3000 series

Отзывы: