Kodak Guidelines 3000 series Скачать руководство пользователя страница 56

Страница: 56 / 79

Maintaining
the Printer

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

MAINTAINING THE PRINTER

REPLACING THE INK CASSETTES

CAUTION:

•

You should avoid any direct contact with the inks. If you

come in contact with the inks, do the following:

−

Eye contact: Rinse out the ink with a large quantity of water,

and consult your doctor.

−

Skin contact: Wash off the ink with soap and water.

−

Ingestion: Rinse your mouth immediately. Drink a large

quantity of water or milk, and consult your doctor.

•

Keep the ink cassettes out of the reach of children.

•

The ink cassettes are inflammable (ignition point 63°C). Avoid

contact with heating and ignition sources.

•

Dispose of used ink cassettes in accordance with regional

environmental regulations.

When the control panel message is or replace the ink
cassette(s) as soon as possible.

When the message is , prepare to have new ink cassettes available.

1. If the message is ,

remove the ink cassette.

NO INK

NO CARTRIDGE

INK LOW

NO INK

Содержание Guidelines 3000 series
















































































Результаты поиска

Содержание Guidelines 3000 series

Отзывы:

Kodak Guidelines 3000 series, Руководство пользователя, Страница: 56 / 79

Результаты поиска

Содержание Guidelines 3000 series

Отзывы: