manualshive.com logo in svg

Kodak Guidelines 3000 series, Руководство пользователя, Страница: 48 / 79

Поделиться
Скачать
Kodak Guidelines 3000 series Скачать руководство пользователя страница 48

Setting up the Printer

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

43

6.  The printer displays [Pattern B:    4]. Using the [VALUE +] and [VALUE -] keys,

enter the number of the best image for Pattern B. Press [ENTER].

7.  The printer displays [Pattern C:    4]. Using the [VALUE +] and [VALUE -] keys,

enter the number of the best image for Pattern C. Press [ENTER].

The printer displays [User 1 Plot OK]. The specified values are now stored in the
printer.

Removing Roll Media

1.  After printing, open the cover, lift the media hold lever UP, and wind the roll media.

2.  Stand behind the printer. Press the lock lever down to unlock the scroller receiver.

Lift the right side of the scroller, and remove it from the printer.

IMPORTANT:

Placing the scroller bar on its end can damage the end cap.

 

3.  Remove the movable flange with the roll media from the scroller. Remove the roll

media.

Содержание Guidelines 3000 series
















































































Отзывы:

Нет отзывов