background image

Product Specifications 

AC 100V - AC 240V (Stand-by: Min 4.8W, Operation: Max 19W)

DC +12.8V

Call Signal (Electronic Tone Sound)

User can monitor situations of front door camera using "Front Door" button on monitor.

By pressing "Guard/Lobby" button for about 5 seconds, users can monitor lobby situations

(This function is available only in lobby phones adopting TEN-KEY [KLP-100 series] mode).

When pressing call button on outdoor camera, call signal rings.

Explanation for melody type of front door camera :

- Camera 1 : ‘Ding-Dong~’ 2times

- Camera 2 : ‘Ddiriri~’ 8times

Hands-free System (DSP)

In calling from front door camera, image maintains for about 30 seconds. 

While communicating, image maintains for about 3 minutes.

Front Door Camera: 4-wire Polarity IV 0.65mm or more

Main line: VOICE1/VOICE2/DATA(3-line) Polarity IV 0.8mm or more

Power (+/GND) (2-line) Polarity IV 1.2mm or more

For video line, coaxial cable is used - COAXIAL 5C-2V

237(W) X 199(H) X 39(D) mm

Front Door Camera: When 0.65mm cable is used, 30m

Main Line Communication Line: When IV 0.8

Ф

is used, 300m

Monitor: 0.C ~ 50.C

Power Source

Voltage of Operating Power

Lobby / Guardroom / In-house Call Signal

Monitoring of Front Door Camera

Lobby Phone's Lobby 

Monitoring Function

Call Method

Communication Method

Image Maintenance Time

Number of Wiring

Dimensions

Communication Distance

Guaranteed Operation Temperature

��

KC-C60, KC-MC35 Front Door Camera 

��

KIV-212 Monitor /  KIV-D212 Monitor

Component

Monitor Accessories

Camera 

Monitor Components

A Wall Hanger Frame

Wall Hanger 
Fixing Screws

Wiring Lines of Camera 1 & 2

Blue (Power)

Yellow (GND)

Red (Voice)

White (Video)

Gray (+17V)

Violet (GND)

Blue (Voice)

Green (Voice)

Yellow (Video Input)

Orange (Data)

Red (In-house Line)

Brown (Data in-house line)

Black (Video Output)

Wiring Lines of Multi-home Main Line

Front Door Camera Components

Camera Main Frame Supporter

Monitor

Screws for fixing camera 
to main frame supporter

Screws for fixing cabinet 
body on the wall

Upward adjusting supporter
for lens angle

Power Source

Ambient temperature

Angle of picture

Min. Illumination

Lens

Dimension

DC12V

±

1V(Power from monitor)

-10

~ 50

Diagonal 120

0.1Lux(LED ON)

F:2.0,   f=3.0mm

95(W) X 127(H) X 34(D)mm

CAMERA 

(KC-C60)

Metal Pinhole Camera 

(KC-MC35)

Diagonal 90

F:3.5,   f=3.8mm

95(W) X 127(H) X 33(D)mm

11

12

Содержание KC-C60















Отзывы: