▷
▷
Call to guardroom - How to communicate
1. When user presses guard/lobby button , call signal rings and the button's LED is turned on
to call guardroom phone.
2. If handset is picked up in guardroom phone, communication begins (for up to 3 minutes).
3. If hanging up the handset in guardroom or pressing communication or guard/lobby button
on videophone, and communication will be automatically ended.
▷
▷
Call from lobby phone - How to communicate
1. When a call from lobby phone, both communication and guard/lobby buttons flicker
(tone sound rings for 30 seconds).
2. Press communication or guard/lobby buttons , and communication will be
available (communication lasts for 3 minutes).
3. Press door open button on videophone while communicating with lobby phone to operate
common gate opener.
4. Press either communication or guard/lobby button to end communication.
▷
▷
Monitoring of Lobby (Common Gate) Situations
1. If pressing the guard/ lobby button around 3 sec. on the monitor for about 3sec, the image
from lobby phone (common gate camera) is displayed on the monitor screen.
But in case the lobby phone (common gate camera) or guardroom phone is busy, the image from
lobby phone (common gate camera) is not displayed.
2. After 8 sec. of lobby (common gate) monitoring, the monitor screen is automatically turned off.
3. In house, the users can see the image and hear the voice from the lobby phone (common gate camera)
for 8 sec.
4. This lobby (common gate) monitoring function is only available with 10 key type of KLP-100,
KLP-P100 & KLP-C100 lobby phone (common gate camera).
※
※
Communication is available only when options are installed. If options are not installed,
only tone sounds rings.
▷
▷
Call from In-house Line (When options are installed)
1. When internal call signal, in-house line LED at the front side of videophone flickers.
2. Press either communication or in-house line button to start communication
(LED keeps On-mode).
3. Communication is available for up to 3 minutes. When 3 minutes pass, communication is automatically
ended.
4. Press either communication or in-house line to end communication.
▷
▷
Internal Call using In-house Line (When options are installed)
1. When user presses in-house line button , the button's LED flicker and a call signal is sent to
extended unit.
2. Press communication or in-house line button on extended unit to begin
communication (communication maintains for 3 minutes).
3. Press communication or in-house line button to end communication.
※
Users can control chime volume by adjusting 3-level volume switch on videophone.
※
In all functions, call maintenance time is set for 30 seconds. After 30 seconds, call signal and images
return to stand-by mode.
※
All communications maintains for 3 minutes. After 3 minutes, communication automatically
returns to stand-by mode.
�
Instructions for Operation
Model: (KLP-100 / KLP-P100 / KLP-C100), Functional Specifications
▷
▷
Call to house
When a visitor calls to house using lobby phone, press house number.
> Pressing call button, call sound rings and house is called.
> If the house responds to the call, communication is available for 3 minutes.
(Pressing door open button during the communication, opener installed with common gate is opened.)
> When communication is ended, device returns to standby mode.
▷
▷
Call from lobby phone to guardroom
Pressing
“
0
”
and call button on the lobby phone, guardroom is called and lobby phone ID is displayed
in guardroom phone.
> Communication with guardroom maintains (for 3 minutes). When communication is ended,
device returns to standby mode.
▷
▷
Password Change
(Password change function is only available during the call with house.)
Pressing
“
# # 0 0 #
”
during the call with house,
“
- - - -
”
is displayed.
Input new password and press
“#”
button.
e.g) When register passward as ‘1111’. (It should be 4 digits)
▷
▷
Door open using lobby phone with password
Pressing
“
house # + pa #
”
designated by the house, door is automatically opened.
when the user from house number “0101” opens common gate with passward.
e.g) Press house number
“
0101
”
, #, passward and # in order.
[Lobby Phone's Direct-Button Call Function]
Model : KLP-104, 108, 112, KLP-P104, P108, P112, KLP-C104, C108, C112
To call to house, press house number using lobby phone's key pad.
Tone sound rings and call signal is sent to the house.
Pressing the call button again while calling, calling is cancelled. No separate cancel button is offered.
If called house is communicating with extended other lobby phones or guardroom phone,
busy signal sounds and device immediately returns to stand-by mode.
▷
▷
Operation of Door Opener While Communicating with House
1. Pressing door open button during the communication with house, common gate is opened.
(Door Opener Specification: Within DC 12V 300mA)
※
Functional specifications may be changed according to the specifications of installed products.
(Stand-by) (House Number) (Call state) (Communication state) (Stand-by)
(Stand-by) (Guard Master Number) (Call state) (Communication state) (Stand-by)
(Communication state) (Password input mode) (Hold) (Password) (# Button)
(Stand-by) (House Number) (# Button) (Password) (# Button) (Releasing common gate)
17
18
