MINOR CHANGE MACHINE FAMILIARIZATION
2
Dynamic Acera 03/05 Rev. 05
Page 3-65
10 : 10
Within 5 sec.
(Automatically)
MONITOR
SYSTEM
OK
Clock icon
256Hr
E/G
OIL
CH
AFT
2250RPM
123Hr
FUEL
FIL
CH
AFT
135Hr
HYD
FIL
CH
AFT
1275Hr
HYD
OIL
CH
AFT
YQ102ChangeScreen
NOTE: When depressing the screen monitor
switch, make sure to hold switch down
for 0.5 seconds to properly activate the
switch function.
YQ102AirFiltCompartment
3. Screen Change Switch – FIGURE 2.7A
CAUTION
WASHER FLUID
RESERVOIR
FIGURE 2.7C
Accumulated Hrs since
last engine service
Accumulated Hrs since
last fuel filter change
Accumulated Hrs since
last hyd. filter change
Accumulated Hrs since
last hyd. oil change
4. Wiper & Washer Switch– FIGURE 2.7B
a.
Press it once : Wiper moves intermittently
b.
Press it again : Wiper moves continuously
c.
Press it once more : Wiper stops moving
– Press this switch, and washer fluid is
sprayed while it is depressed.
The washer fluid reservoir is located be-
hind the cab, in the air cleaner compart-
ment. See Figure 2.7C.
Make certain the Washer reservoir has washer fluid be-
fore operating washer.
5. Auto Accel Switch– FIGURE 2.7D
This switch is used to activate and cancel the
auto accel function.
a.
Press it once : With auto accel functional
deactivates auto accel and the light indica-
tor above the switch is turned OFF.
b.
Press it again : The auto accel function is
reactivated and the light indicator is turned
ON.
FIGURE 2.7A
YQ102Wiper&Washer
WASHER
WIPER
YQ102AutoAccelSwitch
FIGURE 2.7B
FIGURE 2.7D
YQ102AutoAccelON
NOTE
All Dynamic Acera minor change excavators will default
to the proportional auto acceleration function when the
ignition key is turned to the OFF position.
Tachometer
NOTICE
When auto accel is deactivated the rpm will not in-
crease when the button is first pressed for safety, pilot
joystick lever movement to full stroke must be carried
out one time to deactivate the auto accel function. After
this action throttle response with be controlled thru the
throttle potentiometer.
