Page 3-47
Dynamic Acera 03/05 Rev. 05
3. Safety Lock Lever – FIGURE 2.38.a
The safety lock lever is located on the front
outside of the left hand operator console
and is red in color. The safety lock Lever
is used to lock out the hydraulic controls
disallowing the use of any hydraulic func-
tion. The safety lock Lever has 2 operat-
ing positions.
“UP ”- When placed in the up posi-
tion the safety lock lever stops all
hydraulic controls from functioning
and allows the operator to enter and
exit the operator seat.
“DOWN ”- When placed in the down position,
the safety lock lever allows all oper-
ating functions of the hydraulic con-
trols to resume and also locks the left
hand operating console in operating position.
ALWAYS PLACE THE SAFETY LOCK
LEVER IN THE LOCKED (UP)POSITION
BEFORE LEAVING THE OPERATOR’S
CAB.
NEVER LEAVE THE MACHINE UNAT-
TENDED WITH ENGINE RUNNING OR
LEVER IN THE DOWN POSITION.
CAUTION
MACHINE FAMILIARIZATION
FIGURE 3.38.a
4. Adjustment of Pilot Control Levers
Height –FIGURE 2.38.b
To adjust the height of the pilot control levers,
use a 17 mm wrench and remove capscrew
(M10)under the operator console. The 3-stage
setting hole position is as follows:
FIGURE 3.38.b
a.
From factory,the hole is set to the me-
dium position (H1).
b.
If it is set to the medium position (H1),
the valve height is raised 10mm (0.4”).
c.
When it is set to the lowest position (H2),
the height is raised max.20mm (0.8 ”).