Kobalt K18LD-26A Скачать руководство пользователя страница 75

Страница: 75 / 85

kobalttools.com

SAFETY INFORMATION

Personal Safety

! !"

sense when operating a power tool. Do not use a power tool
! "
or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

' * %!!

protection.

Protective equipment such as a dust mask, non-

skid safety shoes, hard hat, or hearing protection, used for
appropriate conditions, will reduce personal injuries.

# "+

the off-position before connecting to a power source and/or
battery pack, picking up or carrying the tool.

Carrying power

% % & %
have the switch on invites accidents.

2!3 "! "

power tool on.

A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

all times.

This enables better control of the power tool in

unexpected situations.

! "3!

your hair, clothing and gloves away from moving parts.

Loose clothing, jewelry or long hair can be caught in moving
parts.

4 0

and collection facilities, ensure that these are connected
and properly used.

Use of these devices can reduce dust-

related hazards.

Содержание K18LD-26A






















































































Результаты поиска

Содержание K18LD-26A

Отзывы:

Бренды по названию

Популярные бренды

Kobalt K18LD-26A, Руководство пользователя

Результаты поиска

Содержание K18LD-26A

Отзывы:

Бренды по названию

Популярные бренды