Kobalt K18LD-26A Скачать руководство пользователя

Страница: 73 / 85

kobalttools.com

IMPORTANT SAFETY INSTRUCTIONS

Save These Instructions

This manual contains important safety and operating instructions for
battery charger.

Before using battery charger, read all instructions and cautionary
markings on battery charger, battery, and product using battery.

CAUTION:

To reduce risk of injury, charge only 18V, maximum

1,500 mAh Li-Ion, 18V, maximum 3,000 mAh Li-Ion or 18V, maximum
1,300 mAh Li-Ion type rechargeable batteries. Other types of
batteries may burst causing personal injury and damage.

SAFETY INFORMATION

Know the Tool

To operate this tool, carefully read this manual and all labels
to the tool before using it. Keep this manual available for future
reference.

Important

Read All Instructions Thoroughly

General Safety Rules for all Power Tools

WARNING: Read all safety warnings and all instructions.

Failure to follow all warnings and instructions may result in electric
! "

Save all warnings and instructions for future reference

The term “power tool” in the warnings refers to your mains operated
(corded) power tool or battery operated (cordless) power tool.

Содержание K18LD-26A






















































































Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды

Kobalt K18LD-26A, Руководство пользователя

Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды