Kobalt K18LD-26A Скачать руководство пользователя

Страница: 3 / 85

kobalttools.com

SAFETY INFORMATION

Know the Tool

Keep this manual available for future reference.

Important

Read All Instructions Thoroughly

General Safety Rules For All Power Tools

WARNING: Read all safety warnings and all instructions.

Failure to follow all warnings and

! "

Save all warnings and instructions for future reference

The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.

Work Area Safety

Cluttered and dark areas invite accidents.

liquids, gases or dust.

Power tools create sparks, which may ignite the dust or fumes.

! ! "

Distractions can cause you

to lose control.

Electrical Safety

# " $! "!! !

adaptor plugs with earthed (grounded) power tools.

$ %

reduce the risk of electric shock.

%! " "

refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

Water entering a power tool will increase

the risk of electric shock.

$ !"""""

tool. Keep the cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled

cords increase the risk of electric shock.

& "

Use

of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a ground-fault circuit

interrupter (GFCI) protected supply.

Use of a GFCI reduces the risk of electric shock.

Содержание K18LD-26A






















































































Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды

Kobalt K18LD-26A, Руководство пользователя

Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды