Kobalt K18LD-26A страница 29 Скачать руководство пользователя

Страница: 29 / 85

kobalttools.com

OPERATING INSTRUCTIONS

1. Variable-Speed Trigger Switch

Your saw is equipped with a trigger switch (A) to turn

the saw on and off, and to control the speed.

a. To start the saw, depress the lock-off button (R) and

then squeeze the trigger switch.

b. To stop the saw, release the trigger switch and allow

it to return to the “OFF” position.

2. To Attach Battery Pack

a. Ensure that the trigger switch (A) is in the “OFF”

position.

Align the raised rib on the battery pack (not included)
with the grooves on the bottom of the saw, and then
attach the battery pack to the saw.

NOTICE

: Make sure that the latch on the battery pack

snaps into place and the battery pack is secured to the
tool before beginning operation.

CAUTION:

When placing the battery pack on the

tool, be sure that the raised rib on battery pack aligns with
the groove on the saw and the latches snap into place
properly. Improper assembly of the battery pack can
cause damage to internal components.

To Detach Battery Pack (Fig. 2)

Ensure that the trigger switch is in the ‘OFF’ position.

Depress the battery-release button located on the front of the battery pack to release the battery
pack.

Pull the battery forward to remove from the tool.

Saw

Blades

% % !

Using a dull blade will place a heavy load on the saw and increase the danger of kickback. Keep
%

b. Gum and resin on blades will slow the saw down. Follow the instructions for REMOVING A SAW

BLADE, use gum and resin remover, hot water, or kerosene to remove these accumulations.

WARNING:

Do not use gasoline to clean the blade.

Содержание K18LD-26A






















































































Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды

Kobalt K18LD-26A, Руководство пользователя

Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды