Kobalt K18LD-26A Скачать руководство пользователя

Страница: 53 / 85

kobalttools.com

SAFETY INFORMATION

KNOW THE TOOL

%!
Keep this manual available for future reference.

IMPORTANT

Read All Instructions Thoroughly

General Safety Rules for All Power Tools

WARNING: Read all safety warnings and all instructions.

% %

! "

Save all warnings and instructions for future reference.

}% ~ % ?@ %
?@ %

Work Area Safety

Cluttered and dark areas invite accidents.

liquids, gases or dust.

% ! %

Keep children and bystanders away while operating a power tool.

Distractions can cause you

to lose control.

Electrical Safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adaptor plugs with earthed (grounded) power tools.

$ %

reduce the risk of electric shock.

%! " "

refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

< % %

the risk of electric shock.

$ !"""""

tool. Keep the cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled

cords increase the risk of electric shock.

& "

Use

of a cord suitable for outdoor use reduces the risk of electric shock.

4 " "0

interrupter (GFCI) protected supply.

Use of a GFCI reduces the risk of electric shock.

Содержание K18LD-26A






















































































Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды

Kobalt K18LD-26A, Руководство пользователя

Результаты поиска

Содержание K18LD-26A

Отзывы:

Похожие инструкции для K18LD-26A

Бренды по названию

Популярные бренды