Knurr RMS compact, Руководство пользователя, Страница: 26 / 64

RMS compact
26
Once a desired logic condition has occurred, (e.g. inputs 1 AND 2 are present), then the user may introduce a
delay before the output is set (to allow for rapid or erroneous changes in input condition). The same is true for
clearing of an output once the condition has cleared. These timers are set by selecting the ‘
Time On Delay’ or
‘ Time Off delay’ from the Boolean menu
4. Enable Logic Outputs
Selecting the ‘Set Output Values’ option from the Boolean menu will display the following screen:
Knuerr RMS compact version X.X.X
Embedded Agent Setup
1. Enable Outputs
2. Change Output Names
3. Trap Controls
4. Exit settings Menu
Enter choice (ESC to exit):
Figure 30 Setting Output Values Configuration Screen
To enable logic outputs. Select option 1 in the above menu, this should display the following screen:
Knuerr RMS compact version X.X.X
Embedded Agent Setup
OUTPUT 1: Enabled
OUTPUT 2: Enabled
OUTPUT 3: Enabled
1. EnableOutput 1
2. EnableOutput 2
3. EnableOutput 3
4. Back to prev menu
Enter choice (ESC to exit):
Figure 31 Enable Outputs Screen
This screen enables or disables Relay outputs.
3. Name Outputs
Option 2 in the Setting Output Values Configuration Screen, enable the user to configure a text descriptor for
each output.
4. Configure traps for logic outputs
Selecting this option will display the following menu:
Knuerr RMS compact version X.X.X
Embedded Agent Setup
1. Trap Off to On Enables
2. Trap Off to On repeat Timer Settings
3. Trap On to Off Enables
4. Trap On to Off repeat Timer Settings
5. Exit Output Traps Menu
Enter choice (ESC to exit):
Figure 32 Configure Output Traps Screen
In this screen the user sets the conditions for sending traps on each output being triggered (OFF to ON or ON to
OFF), as well as setting repeat timers for each type (if required).
To Save and Exit
If you are satisfied with your configurations, save them and exit. To save, press ‘Exit Setup’
The screen displays the following message:
Knuerr RMS compact version X.X.X
Embedded Agent Setup