Knurr RMS compact, Руководство пользователя, Страница: 18 / 64

RMS compact
18
4 000.000.000.000 no no
5 000.000.000.000 no no
6 000.000.000.000
no no
7 000.000.000.000 no no
8 000.000.000.000 no no
9 000.000.000.000 no no
10 000.000.000.000
no no
Select Table entry to change (ESC to exit):
Figure 18 Trap Receivers
To set TRAPs, at the prompt type the entry number to be edited and <enter> . The following screen will be
displayed:
Knuerr RMS compact version X.X.X
Embedded Agent Setup
IP Address: 1.1.124.124
Community String: public
Flag 1: YES
Flag 2: YES
1. Change Trap Host IP Address
2. Change Trap Host Community String
3. Change Control Trap Flag
4. Change Enable Trap Flag
5. Exit Trap Host Setup
Enter choice (ESC to exit):
Figure 19 Trap Host information
Enter the number for the parameter that is to be edited and <enter >.
The Control Trap flag, enables/disables sending of traps to this address. The Enable trap flag, enables trap
authentication for this NMS address.
The top of the screen reflects your changes:
To return to the Main Menu, type 5 at the prompt and press <enter> .
Note: Note: Note: Note:
Please ensure that only valid Trap Receiver IP addresses are entered into the Trap Host table
within the RMS compact.Adding invalid trap receiver addresses may result in the RMS
compact being unreachable across the network
Temperature and Humidity Configuration
To set Temperature & Humidity thresholds and other values, select 5 at the main menu (please note that an
additional optional temperature & Humidity sensor is required for this). The following menu should be displayed:
Knuerr RMS compact version X.X.X
Embedded Agent Setup
1. Change Temperature 1 Settings
2. Change Humidity 1 Settings
3. Change Temperature 2 Settings
4. Change Humidity 2 Settings
5. Select Centigrade or Fahrenheit
6. Exit Enviromental Inputs Setup
Enter choice (ESC to exit):
Figure 20 Temperature and Humidity Configuration
Temperature Configuration
Option 1 in this menu sets the temperature parameters for temperature sensor 1, and displays the following
menu:
Knuerr RMS compact version X.X.X
Embedded Agent Setup
Temp Monitor Enabled: YES
Temp Name: Temperature 1
Temp Offset: 0.0
Temperature units: Centigrade
1. Change Temperature Monitoring Flag