0900934 Rev: REL (05/09)
Page 5 of 16
•
Clear pump volumes
•
Clear sum/batch report
•
Clear batch count
•
Restore default settings
•
Set external memory module ID
*** DISPENSER ***
MEMORY FUNCTIONS
1
This menu selection is used to do the following:
– All formula volume amounts are set to zero
– All pump flow rates and product costs are set to zero
Press YES to begin clearing, or press NO to move on to the next
menu selection without clearing.
CLEAR PUMP VOLUMES ?
PRESS: YES OR NO
NO
NO
NO
NO
YES
YES
YES
YES
You are then asked if you really do want to use this
command. Press YES if you are sure, or press NO to
move on to the next menu selection without clearing.
This message indicates that the clearing
process is active. When the process is
complete, the next menu item will appear.
CLEARING ALL
PUMP VOLUMES
This menu selection is used to clear the summary and batch
report memory (also known as the batch tracking report). Press
YES to begin clearing, or press NO to move on to the next menu
selection without clearing.
NOTE: This will only clear the time stamps in the basic system
memory. There is a separate prompt later in this menu to clear the
time stamps in the external memory module.
CLEAR SUM/BATCH REPORT ?
PRESS: YES OR NO
NO
NO
NO
NO
YES
YES
YES
YES
This message indicates that the clearing process is
active. When the process is complete, the next menu
item will appear.
CLEARING ALL SUM/BATCH
INFORMATION
ARE YOU SURE ?
PRESS: YES OR NO
YES
YES
YES
YES
NO
NO
NO
NO
GO TO NEXT PAGE
NOTE: Answer YES on all memory clearing prompts for new installations prior to loading a HEX (setup) file.
