Page 10 of 16
0900934 Rev: REL (05/09)
•
Change user access code
•
Change user name and code / enter proximity cards
•
Change report name
•
Change chemical names and costs
•
Change formula names
•
Set shift times and operating zone
*** DISPENSER ***
REPORT SETUP ROUTINES
3
This menu selection allows you to change the user access code.
Press YES to invoke the command, or press NO to move on to
the next menu selection.
CHANGE USER ACCESS CODE ?
PRESS: YES OR NO
NO
NO
NO
NO
YES
YES
YES
YES
Use the number buttons to set the user access code,
then press ENTER. Press the MENU
button to move
on to the next menu selection.
USER ACCESS CODE = 000
THEN PRESS ENTER
This menu selection allows you to change the user codes that
allow the user to dispense chemical. Press YES to invoke the
command, or press NO to move on to the next menu selection.
CHANGE USER CODE ?
PRESS: YES OR NO
NO
NO
NO
NO
YES
YES
YES
YES
Use SCROLL and alphanumeric keypad to enter a code
for the user ID number shown, then ENTER. Use MENU
or
to review or change other user codes. Press
RESET when finished to return to the previous screen.
— Card reader off:
User codes are the first 3 digits (of
the 8 digit combo) and are numeric entries only.
— Card reader on:
User codes are all 8 digits and are
numeric entries only. For convenience, the code can be
input on the display by simply swiping the card past the
reader. Wait a few seconds for the code to appear, then
press ENTER.
001 000 00000
CHANGE CODE THEN ENTER
GO TO NEXT PAGE
This menu selection allows you to change the user names that
appear on the display. Press YES to invoke the command, or
press NO to move on to the next menu selection.
CHANGE USER NAME ?
PRESS: YES OR NO
NO
NO
NO
NO
YES
YES
YES
YES
Use SCROLL and alphanumeric keypad to enter a
descriptive name (up to 15 characters) for the user ID
number shown, then ENTER. Use MENU
or
to
review or change other user names. Press RESET when
finished to return to the previous screen.
001 USERID NAME 001
CHANGE NAME THEN ENTER
