Knick SensoTrans A 20220P0 Series, Руководство пользователя

Страница: 38 / 104

38
Sensitivity:
Use DIP1 to DIP3 to set the number to the left of the decimal point for
the input sensitivity (mV/V).
Use the “Sensitivity” rotary switches (S) to set the numbers to the right
of the decimal point (x.00 ... x.99).
Configuration using Switches
Adjust the DIP and rotary switches according to the table on the
housing.
Sensitivity
(rotary switches)
Zero
(rotary switches)
DIP S1
DIP 1...3: Sensitivity range
DIP 4...6: Zero range
DIP 7, 8: Output signal selection
[mV/V]
0 0.99 1.99 2.99 3.99 -0.99 -1.99 -2.99 -3.99
Range DIP S1
1 2 3
0+S/100
1+S/100
x
2+S/100 x
3+S/100 x x
±(0+s/100) x
±(1+s/100) x x
±(2+s/100) x x
±(3+s/100) x x x
Within these ranges the exact value is specified by
the rotary switches (“S”).
Minimimum input range