Knick Protos CONDI 3400(X)-051 Скачать руководство пользователя страница 95

Страница: 95 / 96

Icon

Explanation of Icons Important for this Module

The analyzer is in measuring mode.

The analyzer is in calibration mode. HOLD mode active for the currently calibrated module

The analyzer is in maintenance mode. HOLD mode active.

The analyzer is in parameter setting mode. HOLD mode active.

The analyzer is in diagnostics mode.

HOLD. The NAMUR “HOLD” contact is active (factory setting: Module BASE, Contact K2,

N/O contact). Current outputs as configured:

• Current meas.:

The currently measured value appears at the current output

• Last usable value: The last measured value is held at the current output

• Fixed 22 mA:

The output current is at 22 mA

Calibration is performed

Calibration - Step 1 of product calibration has been executed.

The analyzer is waiting for the sample values.

Temperature detection by manual input

In the plaintext display in front of a menu line:

Access to next menu level with enter

In the plaintext display in front of a menu line when it has been blocked by the

Administrator against access from the Operator level.

Designates the module slot (1, 2 or 3), allowing the clear assignment of measured-value/

parameter displays in the case of identical module types.

Indicates the active parameter set . (The analyzer provides two parameter sets A and B.

Up to 5 sets can be added using additional functions and SmartMedia card.)

Failure. The NAMUR “failure” contact is active (factory setting: Module BASE, Contact K4,

N/C contact). To view error message, call: Diagnostics menu/Message list
Maintenance. The NAMUR “maintenance request” contact is active (factory setting: Module

BASE, Contact K2, N/O contact). To view error message, call: Diagnostics menu/Message list

NAMUR signals

Calibration:

Temperature compensation for process medium is active (Linear/Ultrapure water/Table)

man

Limit indication: Lower / upper range limit exceeded

Содержание Protos CONDI 3400(X)-051

































































































Результаты поиска

Содержание Protos CONDI 3400(X)-051

Отзывы:

Бренды по названию

Популярные бренды

Knick Protos CONDI 3400(X)-051, Руководство пользователя

Результаты поиска

Содержание Protos CONDI 3400(X)-051

Отзывы:

Бренды по названию

Популярные бренды