16
Electromagnetic compatibility
•
The product has been tested for electromagnetic compatibility in accordance with the
applicable European standards for industrial applications.
•
The electromagnetic compatibility indicated applies only to a product that has been
connected in accordance with these Operating Instructions.
2.4
Operational safety
Before commissioning the entire measuring point:
1. Verify that all connections are correct.
2. Ensure that electrical cables and hose connections are undamaged.
3. Do not operate damaged products, and protect them against unintentional operation.
4. Label damaged products as defective.
During operation:
‣
If faults cannot be rectified:
products must be taken out of service and protected against unintentional operation.
CAUTION
Cleaning not switched off during calibration or maintenance activities
Risk of injury due to medium or cleaning agent!
‣
If a cleaning system is connected, switch it off before removing a sensor from the medium.
‣
If you wish to check the cleaning function and have therefore not switched off the cleaning
system, wear protective clothing, goggles and gloves or take other appropriate measures.
2.5
2.5.1
Product safety
State of the art
The product is designed to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate. The relevant regulations and
European standards have been observed.
17
3
3.1
Product description
Product design
1
2
3
4
A0036216
1
1
2
3
4
Transmitter design
Cable
Housing
Memosens connection
LED, for optical signaling of operating statuses of measuring point
3.1.1
Measuring parameters
The transmitter is designed for digital Memosens sensors with inductive plug-in head:
•
pH, ORP, pH/ORP combined sensors
•
Conductivity
•
Dissolved oxygen
4
4.1
Incoming acceptance and product identification
Incoming acceptance
1. Verify that the packaging is undamaged.
Notify the supplier of any damage to the packaging.
Keep the damaged packaging until the issue has been resolved.
2. Verify that the contents are undamaged.
Notify the supplier of any damage to the delivery contents.
Keep the damaged goods until the issue has been resolved.
3. Check that the delivery is complete and nothing is missing.
Compare the shipping documents with your order.
16
Electromagnetic compatibility
•
The product has been tested for electromagnetic compatibility in accordance with the
applicable European standards for industrial applications.
•
The electromagnetic compatibility indicated applies only to a product that has been
connected in accordance with these Operating Instructions.
2.4
Operational safety
Before commissioning the entire measuring point:
1. Verify that all connections are correct.
2. Ensure that electrical cables and hose connections are undamaged.
3. Do not operate damaged products, and protect them against unintentional operation.
4. Label damaged products as defective.
During operation:
‣
If faults cannot be rectified:
products must be taken out of service and protected against unintentional operation.
CAUTION
Cleaning not switched off during calibration or maintenance activities
Risk of injury due to medium or cleaning agent!
‣
If a cleaning system is connected, switch it off before removing a sensor from the medium.
‣
If you wish to check the cleaning function and have therefore not switched off the cleaning
system, wear protective clothing, goggles and gloves or take other appropriate measures.
2.5
2.5.1
Product safety
State of the art
The product is designed to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate. The relevant regulations and
European standards have been observed.
17
3
3.1
Product description
Product design
1
2
3
4
A0036216
1
1
2
3
4
Transmitter design
Cable
Housing
Memosens connection
LED, for optical signaling of operating statuses of measuring point
3.1.1
Measuring parameters
The transmitter is designed for digital Memosens sensors with inductive plug-in head:
•
pH, ORP, pH/ORP combined sensors
•
Conductivity
•
Dissolved oxygen
4
4.1
Incoming acceptance and product identification
Incoming acceptance
1. Verify that the packaging is undamaged.
Notify the supplier of any damage to the packaging.
Keep the damaged packaging until the issue has been resolved.
2. Verify that the contents are undamaged.
Notify the supplier of any damage to the delivery contents.
Keep the damaged goods until the issue has been resolved.
3. Check that the delivery is complete and nothing is missing.
Compare the shipping documents with your order.
