Knauer Azura Assistant ASM 2.2L, Инструкция по эксплуатации

Страница: 31 / 55

AZURA® Assistant ASM 2.2L Instructions V6803
26 Initial startup
ƒ
The connection between the Mobile Control and the device has been
established.
1.
In Mobile Control choose <Settings> .
2. On the <General> tab, choose the device name.
3. Under <Network Settings> choose the setting <Static>
1
.
4. Enter the IP address into the text box <IP Adress>
2
.
5.
If necessary, change the subnet mask and the gateway
3
.
6. Click in the top right corner.
7. Restart the device.
The device is now accessible via the static IP address.
8.2.7 Mobile Control Setting IP address to DHCP via device
name
ƒ
The device has been switched on.
ƒ
Mobile Control has been installed and started.
ƒ
The connection between the Mobile Control and the device has been
established.
1. In Mobile Control choose <Settings> .
2. On the <General> tab choose the device name.
3. Under <Network Settings> choose <DHCP>
1
.
4. Click in the top right corner.
5. Restart the device.
The device is now accessible via a dynamic IP address.
8.2.8 Mobile Control: Setting IP address to DHCP via device
name
ƒ
The device has been switched on.
ƒ
Mobile Control has been installed and started.
1. In Mobile Control choose <Settings> .
2. Under <Network Settings> click on <Reset>. The window <Reset com-
munication settings> opens.
3. Enter the serial number of the device in the text box.
4. Click <OK>. The device is now reset to factory settings.
5. Restart the device.
The device is now accessible via a dynamic IP address.
Procedure
1
2
3
Result
Prerequisites
Procedure
Result
Prerequisites
Procedure
Result