Knauer Azura Assistant ASM 2.2L, Инструкция по эксплуатации, Страница: 40 / 55

AZURA® Assistant ASM 2.2L Instructions V6803
Functionality tests 35
Procedure Figure
1. Turn the main switch
1
to OFF.
Either restart the assistant in a timely manner or you prepare it for storage
(see p. 41).
10. Functionality tests
Note: In case of the ASM 2.1L the Operation Qualification will be execut-
ed for every single device module.
Note: Standard processes in single devices may be handeled differently
in individual cases.
The customer may request the Installation Qualification, which is free of
charge. In case of a request, the technical support of KNAUER or from a
provider authorized by KNAUER performs this functionality test during the
installation.
The Operation Qualification is a standardized KNAUER document and
includes the following:
ƒ
confirmation of flawless condition at delivery
ƒ
check if the delivery is complete
ƒ
certification on the functionality of the device
The Operation Qualification includes an extensive functionality test ac-
cording to KNAUER standard OQ documents. The Operation Qualification
is a standardized document and free of charge It is not part of the delivery,
please contact the technical support in case of request.
The Operation Qualification includes the following:
ƒ
definition of customer requirements and acceptance terms
ƒ
documentation on device specifications
ƒ
device functionality check at installation site
To make sure that the device operates within the specified range, you
should test the device using the Operation Qualification at following
intervals: The test intervals are dependent on the usage of the device.
The test can be carried out either by the technical support of KNAUER or
from a provider authorized by KNAUER (for a fee).
Note: Flush the system (with the purge valve open) with water for 60 min-
utes before starting the device test.
1
Next steps
Installation Qualification
(IQ)
Operation Qualification
(OQ)
Test Intervals
Execution