KMD-5205 and KMD-5270 Installation and Operation
Revision J
Installing the controllers
Connecting to a computer through the serial port
21
Connecting to a
computer through
the serial port
Multiple computers may access the same controller at the same time. However,
unpredictable operation may occur if two or more operators are making
simultaneous changes.
To initialize or address the controller with the KMC Hardware Configuration
Manager or to program with WinControl XL Plus, connect a KMD-5673 cable
between a serial port on the computer and the RS-232 port on the controller.
◆
See Illustration 2-6 for cable details.
◆
See the section
for procedures on
initializing and programming the controller.
Illustration 2-6 Computer to controller cable
Illustration 2-7 Direct connection to KMD-5205 and KMD-5270
2
3
5
2
3
5
Nine-pin, female D-shell connector
O-R
STATUS
H O A
O-R
STATUS
H O A
O-R
STATUS
H O A
O-R
STATUS
H O A
1
2
3
4
O-R
STATUS
H O A
O-R
STATUS
H O A
O-R
STATUS
H O A
O-R
STATUS
H O A
5
6
7
8
PWR
S-LAN
PC
COLL
Rx
Tx
KMD–5673 cable
