![KMC Controls 69 Series Скачать руководство пользователя страница 35](http://html.mh-extra.com/html/kmc-controls/69-series/69-series_operators-manual_1979499035.webp)
33
"C"
"D"
1"-2"
Leveling Side To Side
Leveling Front To Rear
LEVELING IMPLEMENT TOOL BAR
For best results, when leveling the implement, position the tractor with implement on a level floor.
Check tractor tire pressure and inflate equally from side to side. See your tractor operator’s manual for
correct tire inflation pressure.
With the implement attached to tractor, raise the unit 1 to 2 inches off the floor. Shut-off engine and
lock brakes on tractor. Measure to the bottom edge of the rear toolbar tube on each side of the
machine. Toolbar will be level when dimension “A” is the same as dimension “B” as shown in drawing
above. Level toolbar from side to side by adjusting the lift links on tractor 3-point hitch.
Before adjusting 3-point links see your tractor operator’s manual for correct adjustment procedures
and safety requirements.
Before setting the front coulters or cover crop roller and spiked roller, it is necessary to level the tool-
bar from the front to the rear.
For initial adjustment keep the machine raised off the ground 1 to 2 inches (being sure bottom of
shanks clear floor). Measure to the bottom of the front toolbar tube and the rear toolbar tube.
If toolbar is not level from front to rear with ground line, extend or retract the tractor top link until
toolbar is parallel ( or level) to the ground line. Toolbar will be level when dimension “C” is the same
as dimension “D”.
Further front to back adjustment will be required once machine is operated in
the field. When properly leveled, all shanks will enter the ground to a uniform
depth.
"A"
"B"
1"-2"
GROUND LINE
GROUND LINE
Содержание 69 Series
