Page 16 of 24
See Figure M
19. Mount the Pulley and Belt.
a. Clean the Shaft (35) of all plastic protective material and other debris. Also clean out debris
from the Drum Pulley (49) center hole.
b. Position the Drum Pulley (49) so that the Set Screw hole (48) is facing outward. Squarely
push the Pulley center onto the Shaft so that the groove in the Drum Pulley engages the Key
(47). The Pulley should be flush with the step on the Shaft. Thread the Set Screw (48) and
tighten in place.
Note: Do not pound the Drum Pulley onto the Shaft. Damage can occur resulting in a loose fit.
c. Place the V Belt (61) around the Drum Pulley (49).
Fig. M
V Belt (61)
Motor mount plane (40)
Bolt (37) & Washer
Set Screw
(48)
Drum Pulley
Key (47)
Содержание 49414
Страница 19: ...Page 19 of 24 Parts Diagram...