Klutch 49414, Руководство пользователя

Страница: 10 / 24

Page 10 of 24
Assembly Instructions
See Figure A
1. Place Stand (30) onto Hinge Bracket (34) so that the bolt holes line up.
2. Insert Hex Bolts (26) with Washer (27) through the holes from one side, then Washer (27) and
Lock Nut (23) from the other side, and tighten with a wrench.
3. Insert Support Bracket (25) onto Stand (30) so that the bolt holes line up.
4. Insert Hex Bolts (26) with Washer (27) through holes from one side, then Washer (27) and Lock
Nut (23) from the other side, and tighten with a wrench.
Fig. A
Stand (30)
Support bracket (25)
Hinge bracket (34)
Bolt M8X70 (26)
Washer
Φ
8 (27)
Lock Nut M8 (28)