Klutch 49414, Руководство пользователя

Страница: 6 / 24

Page 6 of 24
ELECTRICAL SAFETY
•
Always check to ensure the power supply corresponds to the voltage on the rating plate.
•
Do not abuse the cord. Never carry or pull a Cement Mixer by its power cord, or yank power cords
or extension cords from the receptacle. Keep power and extension cords away from heat, oil,
sharp edges or moving parts. Replace damaged cords immediately. Damaged cords may cause a
fire and increase the risk of electric shock.
•
Grounded motors must be plugged into an outlet properly installed and grounded in accordance
with all codes and ordinances. Never remove the grounding prong or modify the plug in any way.
Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded.
•
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
•
When operating an electric Cement Mixer outside, use an outdoor extension cord marked “W-A”
or “W.” These cords are rated for outdoor use and reduce the risk of electric shock.
•
Use only Listed extension cords. If used outdoors, they must be marked For Outdoor Use. Those
cords having 3-prong grounding type plugs and mating receptacles are to be used with grounded
Cement Mixers.
•
Check the name plate rating of the Cement Mixer. Use of improper size or gauge of extension
cord may cause unsafe or inefficient operation of theCement Mixer. Be sure the extension cord is
rated to allow sufficient current flow to the motor. Use the following table to determine the proper
extension cord wire gauge: