Klutch 101670 Скачать руководство пользователя страница 6

Page 6 of 20 

 

the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of 
inattention while operating the tool may result in serious personal injury. 

 

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing 
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving 
parts. Air vents on the tool often cover moving parts and should be avoided. 

 

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety 
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in 
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, 
and hearing protection when appropriate. This applies to all persons in the work area.  

 

Do not overreach. Keep proper footing and balance at all times. 

 

CAUTION

 

PRODUCT USE AND CARE 

 

Do not force the product. Products are safer and do a better job when used in the manner for 
which they are designed. Plan your work and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the product will operate properly 
and perform its intended function. Replace damaged or worn parts immediately. Never operate the 
product with a damaged part. 

 

Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. 
Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your product. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure than 
the tool itself. 

 

Keep guards in place and in working order. Never operate the product without the guards in place. 

 

Grounding 

WARNING

 

 

This machine must be grounded while in use to protect the operator from electrical shock. This 
unit is equipped with an electrical cord that has an equipment grounding conductor and a 
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed 
and grounded in accordance with ALL local codes and ordinances. 

 

DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper 
receptacle installed by a qualified electrician. 

Содержание 101670





















Отзывы: