Klutch 101670, Руководство пользователя

Страница: 11 / 20

Page 11 of 20
3.
Retighten the lock handle C.
Set cutting speed
The cutting speed always depends on the material being cut.
1.
Turn the control knob D to increase or decrease the
speed as required.
Sample speeds:
Common steel: 40-60m/min
Aluminum, alloy: 80m/min
Pipes/sections: 70-80m/min
Operating Instructions
⚠
WARNING
•
The machine must be switched off before inserting material to be cut in the vice or before
removing material to be cut from the vice.
•
Keep your hands and fingers in a safe distance from the running saw blade at all times.
•
Safety equipment and guards, etc, must not be removed.
•
Never remove the cutting chips by hand. Use a brush at all times.
•
Never leave the machine when in operation.
1.
Pull out the locking pin from the hole in the body and tilt the saw body to upper position.
D
Pin