Klugmann KO613TCX-PRO, Инструкция по эксплуатации

Страница: 34 / 298

GB
32
Now, set the end-of-cooking time:
the control normally adds the
cooking time to the current time, so
it proposes an end-of-cooking time,
which in our case would be 10:30
(8:30+2:00).
Change the end-of-cooking time to what you
want, in our example 13:00
The oven goes to standby mode, turning off the oven light.
The control automatically turns the oven on at 11:00 (13:00-2:00) and
turns it off at 13:00. The roast will be ready when you return!
Programming the timer: minute-counter
The minute-counter is a function of the timer that is independent from the operation of
the oven, i.e., it does not stop cooking or turn off the oven but functions as an alarm. You
can set it at any time, such as to remind you when to check cooking on the burners, in
addition to the oven, or for other kitchen tasks.
It is even available when the oven is off and, in this case, just touch the timer function
symbol one time. But, if you are using it with the oven on, you must touch the time
function symbol three times:
The separator dots flash to indicate you
can set the time.
Touch the “+” and “-” symbols to set the minutes.
The countdown starts now. After the indicated time passes, the over will and the dedicated
symbol will flash: press any button to stop the beep.
Programming the timer: cancelling the program
To cancel a program, you must set the previously assigned value to zero or turn on the
oven.