~ 25 ~
Fixing the Oven
Place the oven to the gap in the cabinet and fix with 4 screws, as shown in Figure
29.
As the purpose of the fixing with screws is only complementary, make sure the
oven stands on a surface that supports its weight.
To allow 4-5mm gap between the cabinet door and the oven frame, adjust the
hinged of the cabinet doors next to the oven.
IMPORTANT:
To prevent the lower rail from being damaged, follow the instructions below.
Lower rail is designed to ensure better ventilation and correct opening of the oven
door. To make sure that the rail is not damaged due to the appliances mounted
on the floor, the appliance should be supported as shown here.
After installation, the appliance door should be slowly opened to make sure no
damage has occurred.
If these instructions are not adhered to, no responsibility shall be taken for
lower rail damages.
Fig.-29
