~ 19 ~
Placing the Oven Door Back
- Hold the door fast (Figure 17).
- Place the hinge latches in the gaps
and make sure that the gap is fitted into place
as in figure 18.
- Open the door to the end.
- As seen in Figure 19, completely close the
"A" arms on the left and right side.
- Close the door and make sure it fitted
into place.
Removing and Reinstalling the Inner Door Pane for Cleaning
If you want to clean the inner glass of the door, closely follow the precautions and
instructions.
Replacing the glass pane and the door wrongfully causes the oven to be damaged and
voids the warranty.
IMPORTANT!
- Oven door is heavy, take care. When in doubt, do not try to remove the door.
- Make sure the oven and all its parts are cooled down. Do not attempt to replace the
parts of a hot oven.
- Exercise maximum caution when working with the glass pane. Ensure the glass edges to
not crash into any surface. Glass might break.
- Do not use hard abrasive cleaning agents or sharp-edged metal scratchers to clean the
control panel - as they may scratch the surface and cause the glass to break.
- Do not use the oven if you see any damage (crack or break) on the glass pane. Call
Authorized Service or Customer Services.
- Make sure you replaced the glass pane correctly. Do not use the oven when glass pane is
not correctly placed.
- Do not force the glass pane if you are having difficulty removing or replacing it. Call
Authorized Service or Customer Service for help.
Note: The visits made for use or maintenance of the oven are not covered under warranty.
Fig.-17
