~ 21 ~
Replacing the Inner Glass Pane After Cleaning
When replacing the inner glass pane:
- make sure you replaced the pane correctly as shown. Pane must be in the position
specified below to fit in the door and to ensure oven's
safe and correct operation.
- Ensure that glass edges do not crash into
an object or surface.
- Do not try to force the pane into place.
If you're having difficulty replacing the pane,
remove it and start over. Otherwise
call Customer Service.
To install the inner glass pane:
1. Make sure the door is open
2. Replacing the inner glass pane:
- Ensure that four rubber seats are
in place (Figure 25).
IMPORTANT: When reinstalling the glass,
we recommend that you hold the four
rubber seat D in place to prevent the rubber
seals from breaking or sliding off.
- Make sure you hold the pane correctly. You should be able to read the texts on it
when it's facing you.
- Fit the pane into the left E and right F guide rails (Figure 25) and slide up to the
holders H (Figure 26).
- Open the oven door completely and close the arms A on the left and right hinges,
and open the door (Figure 27).
Fig.-25
Fig.-26
Fig.-27
