~ 16 ~
Maintenance
We recommend that you clean the appliance when it is cold, especially the enamel parts. Avoid
using alkaline or acidic materials (lemon juice, vinegar, etc.) on the surfaces.
Do not use chlorine or acid-based cleaning agents.
WARNING
When installed correctly, your product meets all the safety conditions foreseen for this product
category. But special care should be given to the rear and bottom sides of the appliance, since it
can have sharp or hard corners that can cause injuries and these areas should not be touched.
Inside the Oven
The oven must always be cleaned when cold after use. Clean the gap with a mild detergent solution
and warm water.
Appropriate chemicals can be used after consulting the recommendations of the manufacturer and
trying it on a small part of the gap. Abrasive cleaning agents or abrasive clothes must not be used on
the surfaces of the gap.
NOTE: The manufacturer of this appliance does not take responsibility for damages caused by
chemicals or abrasive cleaning.
Enamel Parts
All enamel parts are cleaned only with sponge and soap water, or otherwise non-abrasive products.
Drying with a microfiber or soft cloth is preferred.
Stainless Steel, Aluminum, Painted Parts and Silkscreen Surfaces
Clean using an appropriate product. Always dry thoroughly.
IMPORTANT: These parts must be cleaned very carefully to prevent scratches and wear. Use a soft
cloth and acid-free soap.
Glass Control Panel (Only in some models)
Clean using an appropriate product. Always dry thoroughly.
Do not use hard abrasive cleaning agents or sharp-edged metal scratchers to clean the control panel
as they may scratch the surface and cause the glass to break.
IMPORTANT:
Cut off the appliance's power
before you start cleaning.
CAUTION:
Wait for the oven to cool
down and take care not to
touch the hot heating
elements inside the oven gap.
WARNING:
Do not use abrasive materials
or acidic detergents as they
will scratch the surface
without repair.
IMPORTANT:
Do not use steam cleaning
appliances as the humidity can
get into the oven and make
the appliance unreliable.
CAUTION:
Do not store foreign materials
inside the oven.
WARNING:
Do not use hard abrasive
materials or sharp-edged
metal scratchers as they will
scratch the surface beyond
